There is nothing better than escaping into nature for fitness, relaxation, and general wellbeing. However, wet weather gear that is not properly cared for can impede your enjoyment of it. Regularly cleaning and proofing your clothing and footwear with Nikwax will not only keep it performing better, for longer, it will also save you money and help keep textile waste out of landfill.
So, to beat the April showers and get the very best out of your waterproof kit this spring, read up on our aftercare guidance below…
Why do I need to clean technical waterproof clothing and footwear regularly?
Because general wear, weather conditions, terrain, dirt, and contaminants will all take their toll. No matter the cost or technicality of your wet weather gear, the durable water repellent (DWR) coating (that prevents water absorption) will wear away and items will start to absorb water over time.
It is this reduction in DWR that causes you to feel clammy when active as moisture is unable to escape (breathe) through the material, causing it to build up inside your clothing or footwear instead. Plus, without due care and attention, your gear may start to degrade as bacteria can cause its material(s) to rot.
Is it difficult or expensive to clean and re-proof my gear?
Not with Nikwax! Our reliable and easy-to-use aftercare is also affordable, rejuvenating your gear and allowing you to get back outside in no time.
The Nikwax Outdoor Complete Protection Kit has everything you need to ensure you are fully protected when heading out on an adventure.
Caring for waterproof clothing
Firstly, avoid normal detergents! They are simply not suitable for technical clothing with DWR as they will leave water-attracting residues on the fabric, going against what the garments are there to do in the first place – repel water…
Tech Wash® and TX.Direct® are market-leading aftercare solutions that will enhance the performance of your waterproof gear, ensuring you stay drier for longer and your clothing remains as good as new.
To see just how quick and easy it is to clean and re-proof your wet weather gear, watch this video now.
Caring for waterproof footwear
The same principle applies to footwear – avoid detergents that are not specifically designed for technical boots and shoes, in order to prevent water absorption and degradation of the materials.
Following a tiny bit of prep – removing excess mud – our aftercare duo will completely revive combination (fabric & leather) footwear. Clean it first with our Footwear Cleaning Gel, then follow up by proofing it with our Fabric & Leather Proof. It really is that simple.
Watch this video for the best tips on cleaning and proofing your combination footwear.
What are the benefits of using Nikwax products?
First and foremost, they are environmentally friendly aftercare solutions. They contain no PFCs or hazardous chemicals and are water-based. A key factor for us considering our love for the outdoors and our desire to protect it.
Simply cleaning with Nikwax can revive DWR, so you don’t have to re-proof every time you clean. It is only when cleaning alone no longer prevents water beading up on clothing or footwear that you should re-proof with the appropriate waterproofer.
You can save on energy. Heat is not required to develop the DWR – items can be left to air-dry.
Your clothing and footwear will last longer, which is a win-win! You don’t need to replace your favourite gear as often because our aftercare will maintain its performance, breathability, and water repellency. The result? You can enjoy the outdoors staying dry and comfortable (without over-heating, feeling clammy or feeling too cold).